Anthony Rubick
d643c2a0b3
fix: improve quiet mode handling for dynamic fan control message
2025-07-28 01:46:14 -07:00
Anthony Rubick
a536821c02
fix: be quiet when the $quiet flag is set
...
My syslogs are basically flooded with that "--> disable dynamic fan control" message.
Despite passing the -q flag in the systemd unit file, the logs from this program (and more specifically, that single message) make up at least 60% of my log entries.
This fixes that issue by only printing the message when quiet is false.
2025-07-28 00:33:26 -07:00
Tim Connors
74b8adc61c
Create LICENSE
2025-07-07 03:00:10 +10:00
Tim Connors
c99bd7aa25
fan-speed-control renamed to the mode descriptive poweredge-fand
2025-03-21 16:36:55 +11:00
Tim Connors
3476e7212a
reference other codebases and debugging info
2025-02-18 16:45:46 +11:00
Tim Connors
e6ee99874a
fixed broken logic introduced in e29a05f
...
Sorry people, when I rearranged the logic in e29a05f
2025-01-22 18:03:38 +11:00
Tim Connors
2314f44268
Update readme.md
...
Tuning
2025-01-03 03:15:36 +11:00
Tim Connors
ca21632d8f
Update readme.md
...
Basic tuning info
2025-01-03 02:52:51 +11:00
Tim Connors
0be8072889
small readme.txt changes
2024-11-15 14:15:39 +11:00
Tim Connors
e29a05f4ab
Clarify calculations a little for #5
...
Ordering of ramping cases was a bit over the shop, so cleaned up.
Comment about slope definitions was out of sync. Comment about
$demand range clarified. Some mathematical terms bracketed to be
less ambiguous. Fixes #5 .
2024-11-15 14:11:42 +11:00
Tim Connors
be27b2e538
Update readme.md
...
fixes #2 .
2023-06-20 12:01:01 +10:00
Tim Connors
498629be9c
Update readme.md
...
Also works on R730xd
2023-06-14 18:53:20 +10:00
Tim Connors
93a1623e5e
Added link to ansible module
2023-04-26 14:19:01 +10:00
Tim Connors
5cd92f2b55
Include hddtemp and upadte instructions for using it
2022-12-07 12:52:59 +11:00
Tim Connors
f2fd624c74
also run hddtemp over my nvme drives
2022-12-07 12:43:13 +11:00
Tim Connors
0cff0987e5
Discard "not available" hddtemps, eg spundown disks
...
For spundown scsi disks, hddtemp can report "/dev/sdg: TOSHIBA
MG04SCA60EE: S.M.A.R.T. not available"
2022-05-16 16:46:06 +10:00
Tim Connors
3c86e4f331
include some background information
2022-01-27 15:24:53 +11:00
Tim Connors
be68911f52
all files moved to top level repo directory
2021-12-13 18:11:21 +11:00
Tim Connors
a714531fdd
.gitignore was extraneous
2021-12-13 18:10:56 +11:00
Tim Connors
b2beec06fb
preparing to move entire contents one level down - fixed readme.txt to
...
include all relevant info
2021-12-13 18:10:03 +11:00
Tim Connors
a6324a1008
Update readme.md
...
Added installation instructions, reformatted
2021-12-13 17:58:11 +11:00
Tim Connors
ddf19529c1
Actually tested the hddtemp and sensors regexp against both debian 10 and 11 now
2021-12-08 10:50:22 +11:00
Tim Connors
506a94a402
sensors and hddtemp changed to proper unicode "°"
...
sensors and hddtemp changed to proper unicode "°" from ascii symbol,
but that broke the regexp. Proxmox 7/debian 11 comes with such a fix.
Thanks /u/FreelancerJ for reporting
2021-12-07 22:17:16 +11:00
Tim Connors
0785a260e9
warn about non-numbers even when -q(uiet).
2021-12-06 22:35:25 +11:00
Tim Connors
2fcb2160d3
add "-q" flag to allow script to be quieter and suppress most
...
diagnostic info to STDOUT
2021-12-06 22:32:14 +11:00
Tim Connors
11bd6fa398
don't try to add non-numbers (particularly since will break the
...
average calcualtion), but do warn about them.
2021-12-06 22:31:37 +11:00
Tim Connors
a45d13b353
output less frequent statistics - once per minute, or when a command
...
is changed. Would ideally refactor so outputs all stats rather than
just the final command when demand is changed
2021-06-20 20:52:57 +10:00
Tim Connors
5e0266ae12
hddtemp sometimes prints one drive as having a temperature as 255!
...
(rather than just marking it invalid some *sane* way). Filter those
out
2021-06-19 22:01:18 +10:00
Tim Connors
9a99c112c1
rescale fan velocities after further tuning
2021-06-19 16:27:34 +10:00
Tim Connors
4fd6446e95
Included a bit more info in README.md
2021-02-02 15:55:52 +11:00
Tim Connors
3f7cdab8ff
forgot to set tempfile in /tmp
2020-12-09 00:31:03 +11:00
Tim Connors
eb9ed2a82b
if no valid temps, fallback to default
2020-12-08 13:40:17 +11:00
Tim Connors
c05926d433
Interpret degreeC slightly better (but not yet failsafe)
...
Gah! Software update or locale update, and the degree signs all
changed encoding. Temperature overall got interpreted as 0degreeC,
which I still need to fix.
2020-12-08 13:35:18 +11:00
Tim Connors
cf3a9c347c
make more robust against ipmitool failing
...
in default fallback case (which includes when a fault has occurred or
when the script exits) - keep retrying for a bit, and in servo case,
just allow the next loop to proceed ASAP, without resetting variables
and hysteresis
2020-11-16 12:04:56 +11:00
Tim Connors
e41c1aa38e
ipmitool often fails - just keep using the previous result til it succeeds
2020-11-14 23:33:09 +11:00
Tim Connors
50cfcf0bc5
different fan curve to try to weight lower fans at more optimal temperature
2020-09-15 21:31:48 +10:00
Tim Connors
02255cc345
correct how hdd and expensive temperature tests are done
2020-09-15 20:09:18 +10:00
Tim Connors
a8b0f5ed7c
be more robust against hddtemp not exiting in time because stuck in D state, and not able to be killed
2020-02-08 15:53:43 +11:00
Tim Connors
6f4ca6bbf9
add systemd service file
2020-02-08 15:47:12 +11:00
Tim Connors
320f489649
add couple of comments
2020-01-02 00:02:52 +11:00
Tim Connors
ead6ea755a
Protect against divide by zero, plus have a die handler anyway that makes sure fans reset back to default control
2019-12-29 17:45:13 +11:00
Tim Connors
5b513155ff
display the graphs from just before the fans were throttled back to a dynamic level from their conservative static originals
2019-12-20 19:30:19 +11:00
Tim Connors
1e4fb4497a
include FIXMEs on my roadmap
2019-12-20 17:55:47 +11:00
Tim Connors
0511c3295d
clarified that default firmware behaviour is restored on excessive input ambient temperature
2019-12-20 17:42:10 +11:00
Tim Connors
b9d75f2b9a
converted from bash to perl, and made it servoing to setpoints based on component temperatures
2019-12-20 17:40:17 +11:00
NoLooseEnds
a61a333f48
Merge pull request #7 from jacobjangles/ipmi-encryption-key
...
Add variable for default Dell R710 iDRAC Encryption Key
2019-06-09 21:41:50 +02:00
Jangles
928916cf19
Add variable for default Dell R710 iDrac Encryption Key
2019-06-08 18:44:23 +10:00
NoLooseEnds
09e4b0d3a9
Merge pull request #4 from dalcon007/master
...
Fixed some typos
2019-02-10 19:42:23 +01:00
dalcon007
c274edfcd4
Update R710-IPMITemp.sh
...
Fixed typos
2019-02-10 13:39:58 -05:00
dalcon007
9a7963ae48
Update readme.md
...
Fixed typos
2019-02-10 13:39:33 -05:00
