haiku.rag/docs/configuration/storage.md

Database and Storage

Local Storage

By default, haiku.rag uses a local LanceDB database:

storage:
  data_dir: /path/to/data  # Empty = use default platform location
  auto_vacuum: true  # Enable automatic vacuuming after operations
  vacuum_retention_seconds: 86400  # Cleanup threshold in seconds

• data_dir: Directory for local database storage. When empty, uses platform-specific default locations
• auto_vacuum: When enabled (default), automatically runs vacuum after document create/update/delete operations and database rebuilds. Background vacuums are throttled to at most one every 5 minutes, so sustained ingestion does not trigger continuous compaction, and a final vacuum runs when the client closes. Set to false to disable automatic vacuuming and rely on manual haiku-rag vacuum commands only. Disabling can help avoid potential crashes in high-concurrency scenarios
• vacuum_retention_seconds: When vacuum runs, old table versions older than this threshold are removed. Default: 86400 seconds (1 day). Set to 0 for aggressive cleanup (removes all old versions immediately)

!!! warning "Vacuum Retention Threshold" The vacuum_retention_seconds value should be larger than the typical time it takes to process and write a document. If a concurrent operation is in progress while vacuum runs, setting this value too low can cause race conditions where vacuum removes table versions that an in-flight operation still needs. The default of 86400 seconds (1 day) is conservative and safe for most use cases.

Vacuum Memory Requirements

Vacuum compacts small data files into larger ones. LanceDB targets roughly one million rows per fragment, which a documents table holding multi-megabyte docling blobs never reaches, so each vacuum that follows new documents re-merges the whole existing fragment rather than only the new ones. Peak memory therefore scales with the total size of the documents table, not with how much was added.

Measured peak resident memory is about 5x the size of the documents table's data files. An 8.8 GB table peaked at 48.7 GB. Plan for 6x the size of documents/ on disk as available RAM, or the vacuum will be killed by the OOM killer partway through.

Check the current size with:

du -sh /path/to/database.lancedb/documents.lance

If that number times six exceeds available RAM, use one of:

• Reduce images_scale (see Image Settings). Rendered page rasters dominate the size of documents, and their byte cost falls with the square of the scale factor.
• Set generate_page_images: false if visual grounding through visualize_chunk() is not needed. This removes page rasters entirely.
• Set auto_vacuum: false and run haiku-rag vacuum manually when the machine is otherwise idle, so the peak does not land alongside ingestion.

This is an upstream limitation rather than a haiku.rag setting. Compaction bounds itself by row count instead of bytes, and LanceDB's async API exposes no batch size or fragment target to override it. Tracked at lancedb/lancedb#2325. The requirement above will drop once compaction batches by bytes.

Database Creation

Databases must be explicitly created before use:

CLI:

# Create in default location (see Configuration File Locations below)
haiku-rag init

# Create at custom path
haiku-rag init --db /path/to/database.lancedb

Python:

# Create at custom path
async with HaikuRAG("/path/to/database.lancedb", create=True) as client:
    ...

# Create in default location
async with HaikuRAG(create=True) as client:
    ...

The default location is platform-specific (e.g., ~/Library/Application Support/haiku.rag/ on macOS).

Operations on non-existent databases raise FileNotFoundError. This prevents accidental database creation from typos or misconfigured paths.

Remote Storage

For remote storage, use the lancedb settings with various backends:

# LanceDB Cloud
lancedb:
  uri: db://your-database-name
  api_key: your-api-key
  region: us-west-2  # optional

# Amazon S3
lancedb:
  uri: s3://my-bucket/my-table
  storage_options:
    region: us-east-1

# Amazon S3 with explicit credentials
lancedb:
  uri: s3://my-bucket/my-table
  storage_options:
    aws_access_key_id: YOUR_ACCESS_KEY
    aws_secret_access_key: YOUR_SECRET_KEY
    region: us-east-1

# S3-compatible (SeaweedFS, Tigris, etc.)
lancedb:
  uri: s3://my-bucket/my-table
  storage_options:
    endpoint: http://localhost:8333
    aws_access_key_id: YOUR_ACCESS_KEY
    aws_secret_access_key: YOUR_SECRET_KEY
    region: us-east-1
    allow_http: "true"

# Azure Blob Storage
lancedb:
  uri: az://my-container/my-table

# Google Cloud Storage
lancedb:
  uri: gs://my-bucket/my-table

# HDFS
lancedb:
  uri: hdfs://namenode:port/path/to/table

• LanceDB Cloud (db://): Requires api_key and region. Table optimization and indexing are managed server-side.
• Object storage (s3://, gs://, az://, hdfs://): Uses storage_options for credentials and endpoint configuration. Authentication can also be provided via environment variables (AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY, etc.) or cloud provider SDK defaults (AWS CLI, Azure CLI, gcloud).
• S3-compatible stores (MinIO, Tigris, etc.): Set endpoint in storage_options. When using http:// endpoints, also set allow_http: "true".

The storage_options keys are case-insensitive and passed directly to the underlying object store library. Available keys depend on the backend. See the LanceDB storage docs for details.

Note: Table optimization is automatically handled by LanceDB Cloud (db:// URIs) and is disabled for better performance. For object storage backends (S3, Azure, GCS), optimization and vector indexing are still performed normally.

Caching and Read Consistency

lancedb:
  read_consistency_interval_seconds: 30   # null to never re-check
  index_cache_size_bytes: 536870912       # null for the LanceDB default
  metadata_cache_size_bytes: 268435456

• read_consistency_interval_seconds: how often a connection checks for writes from another process. null never checks, so a long-lived reader never sees the ingester's writes. 0 checks on every read.
• index_cache_size_bytes / metadata_cache_size_bytes: sizes for the caches held by the LanceDB session, which is shared across every connection in the process. The first vector query loads the index into it, so on object storage the cache is what stops the next connection refetching it. Size it for the total set of indexes a process keeps warm, against the memory available to it.

Deployment Pattern: One Writer, Many Readers

LanceDB on S3 supports exactly one writer + N readers per database URI. Multiple writers against the same URI can race on the manifest commit and corrupt state. This is a LanceDB property, not something haiku.rag enforces.

The recommended layout for production is "different buckets, same account, separate IAM roles per process":

• Ingestion process — IAM role with s3:Get/List on the documents bucket and s3:Get/Put/Delete on the LanceDB bucket. Runs haiku-ingester serve (with ingester.sources[type=s3] pointing at the documents bucket). Exactly one such process per LanceDB URI.
• Consumer processes (1..N) — IAM role with s3:Get/List on the LanceDB bucket only. Run haiku-rag --read-only mcp, the chat TUI, etc. They never see the documents bucket.

Each process picks up its own credentials from the AWS default chain (env vars, IAM instance role, AWS profile), so no credentials are hard-coded in the configuration files.

Vector Indexing

Configure vector search settings:

search:
  vector_index_metric: cosine  # cosine, l2, or dot
  vector_refine_factor: 30     # Re-ranking factor for accuracy

For search behavior settings (limit, max_context_chars), see Search and Question Answering.

• vector_index_metric: Distance metric for vector similarity:
  • cosine: Cosine similarity (default, best for most embeddings)
  • l2: Euclidean distance
  • dot: Dot product similarity
• vector_refine_factor: Improves accuracy when using a vector index by retrieving refine_factor * limit candidates (using approximate search) and re-ranking them with exact distances. Higher values increase accuracy but slow down queries. Default: 30
  • Only applies with a vector index - has no effect on brute-force search, which already returns exact results

!!! note Vector indexes are only necessary for large datasets with over 100,000 chunks. For smaller datasets, LanceDB's brute-force kNN search provides exact results with good performance. Only create an index if you notice search performance degradation on large datasets.

Index creation:

Vector indexes are not created automatically during document ingestion to avoid slowing down the process. After you've added documents (at least 256 chunks required), create the index manually:

haiku-rag create-index

This command:

• Checks if you have enough data (minimum 256 chunks)
• Creates an IVF_PQ index for fast approximate nearest neighbor (ANN) search
• Uses LanceDB's automatic parameter calculation based on your dataset size and vector dimensions

Re-indexing:

Indexes are not automatically updated when you add new documents. After adding a significant amount of new data:

haiku-rag create-index  # Rebuilds the index with all data

Searches still work with stale indexes - LanceDB uses the index for old data (fast ANN) and brute-force kNN for new unindexed rows, then combines the results. However, performance degrades as more unindexed data accumulates.

For datasets with fewer than 256 chunks, searches use brute-force kNN scans (exact nearest neighbors, 100% recall) which work well for small datasets but don't scale beyond a few hundred thousand vectors.