Pulse/docs/operations/ADAPTIVE_POLLING_ROLLOUT.md

Adaptive Polling Operations Runbook

GA in v4.24.0 - Enabled by Default

This runbook guides operators managing the adaptive polling scheduler in production. Adaptive polling is enabled by default in v4.24.0 and can be toggled via Settings → System → Monitoring (no restart) or environment variables (restart required).

Follow these operational procedures for steady-state monitoring, troubleshooting, and rollback scenarios.

---

1. Preparation (Before v4.24.0 Deployment)

For new deployments or upgrades to v4.24.0:

1. Monitoring readiness

   • Set up Grafana dashboard with:
     • pulse_monitor_poll_queue_depth (gauge)
     • pulse_monitor_poll_staleness_seconds (gauge, per instance)
     • pulse_monitor_poll_total and pulse_monitor_poll_errors_total (rate panels)
     • pulse_monitor_poll_last_success_timestamp (new in v4.24.0)
     • Alerting panels for circuit breaker state (via scheduler health API)
   • Configure alerts (see §4)

2. Baseline metrics

   • Record pre-upgrade metrics if upgrading from < v4.24.0:
     • Typical polling frequency
     • Average response times
     • Current alert volumes
   • These help assess adaptive polling impact

3. Rollback readiness

   • Verify update rollback workflow: Settings → System → Updates → Restore previous version
   • Test rollback in staging environment
   • Confirm /api/monitoring/scheduler/health accessible
   • Document emergency disable procedure (see §5)

4. Configuration review

   • Review system.json or environment variables for adaptive polling tunables:
     • ADAPTIVE_POLLING_BASE_INTERVAL (default: 10s)
     • ADAPTIVE_POLLING_MIN_INTERVAL (default: 5s)
     • ADAPTIVE_POLLING_MAX_INTERVAL (default: 5m)
   • Adjust if needed for your environment (e.g., high-frequency monitoring)

---

2. Post-Deployment Verification (v4.24.0+)

Adaptive polling is enabled by default. Verify it's working correctly:

1. Check scheduler health

   curl -s http://<host>:7655/api/monitoring/scheduler/health | jq
   

   Expected response:

   • "enabled": true
   • queue.depth reasonable (< instances × 1.5)
   • deadLetter.count = 0 (or only known failing instances)
   • instances[] array populated with your nodes
   • No breaker.state stuck in open (except known issues)

2. Verify UI access

   • Navigate to Settings → System → Monitoring
   • Confirm "Adaptive Polling" toggle is ON
   • Review queue depth and recent poll status

3. Check Grafana metrics (if configured)

   • pulse_monitor_poll_queue_depth shows reasonable values
   • pulse_monitor_poll_staleness_seconds < 60s for healthy instances
   • pulse_monitor_poll_errors_total not rapidly increasing
   • pulse_monitor_poll_last_success_timestamp updating regularly

4. Monitor update history

   • Check Settings → System → Updates for update entry
   • Verify rollback button is available
   • Confirm update status shows "completed"

   Via API:

   curl -s http://<host>:7655/api/updates/history | jq '.entries[0]'
   

---

3. Steady-State Operations

Ongoing monitoring and SLO checks:

1. Daily health checks

   • Review scheduler health dashboard or API endpoint
   • Check for:
     • Queue depth < 50 (alert if > 50 for 10+ minutes)
     • Staleness < 120s for critical instances
     • DLQ count stable (not growing)
     • Circuit breakers mostly closed

2. Weekly reviews

   • Analyze trends in Grafana:
     • Poll success rates
     • Average queue depth over time
     • Circuit breaker trip frequency
     • Dead-letter queue patterns
   • Document any recurring issues

3. SLO targets

   • Queue depth: < 1.5× instance count (< 50 typical)
   • Staleness: < 60s for healthy instances, < 120s for critical instances
   • Poll success rate: > 99% for healthy infrastructure
   • DLQ growth: < 5% per week (excluding known failures)
   • Circuit breaker recovery: < 5 minutes for transient failures

4. Log correlation

   • Cross-reference scheduler health with update history
   • Check /api/updates/history for rollback events correlated with scheduler issues
   • Review audit logs for adaptive polling configuration changes

---

4. Grafana & Alert Configuration

1. Dashboard panels

   • Queue Depth: pulse_monitor_poll_queue_depth
     • Use single-stat with alert if > 1.5× active instances for > 10 min
   • Instance Staleness: panel per instance type using pulse_monitor_poll_staleness_seconds
     • Alert threshold: > 60 s for > 5 min (excluding known failing instances)
   • Polling Throughput: rate of pulse_monitor_poll_total{result="success"} vs result="error"
   • Circuit Breakers / DLQ: table from scheduler health API (via scripted datasource) highlighting non-closed breakers or DLQ entries
   • Last Success Timestamp (v4.24.0+): pulse_monitor_poll_last_success_timestamp to detect polling gaps

2. Alerts

   • Queue depth > threshold for >10 min (Warning), >20 min (Critical)
   • Staleness > 60 s for >5 min (Critical)
   • Dead-letter count increase > N (based on baseline) triggers Warning
   • Any breaker stuck in open for >10 min triggers Critical
   • Permanent failures (pulse_monitor_poll_errors_total{category="permanent"}) trigger immediate Critical

3. Notification routing

   • Ensure alerts route to on-call + feature owner

---

5. Rollback Procedures

Option A: Disable Adaptive Polling (Keep v4.24.0)

If adaptive polling causes issues but you want to keep v4.24.0:

1. Via UI (No restart required)

   • Navigate to Settings → System → Monitoring
   • Toggle "Adaptive Polling" OFF
   • Changes apply immediately

2. Via environment variables (Restart required)

   # Systemd
   sudo systemctl edit pulse
   # Add:
   [Service]
   Environment="ADAPTIVE_POLLING_ENABLED=false"
   
   # Then restart
   sudo systemctl restart pulse
   

3. Verification

   curl -s http://<host>:7655/api/monitoring/scheduler/health | jq '.enabled'
   # Should return: false
   

Option B: Full Version Rollback

If v4.24.0 causes broader issues:

1. Via UI

   • Navigate to Settings → System → Updates
   • Click "Restore previous version"
   • Confirm rollback
   • Pulse restarts automatically with previous version

2. Via CLI

   # Systemd installations
   sudo /opt/pulse/pulse config rollback
   
   # LXC containers
   pct exec <ctid> -- bash -c "cd /opt/pulse && ./pulse config rollback"
   

3. Verification

   # Check version
   curl -s http://<host>:7655/api/version | jq '.version'
   
   # Check update history
   curl -s http://<host>:7655/api/updates/history | jq '.entries[0]'
   # Should show action="rollback", status="completed"
   

4. Post-rollback

   • Verify rollback logged in update history
   • Check journal: journalctl -u pulse | grep rollback
   • Monitor for 15-30 minutes to ensure stability
   • Document rollback reason and notify stakeholders

---

6. Troubleshooting

Symptom	Possible Cause	Action
Queue depth remains high (> 2× usual)	Insufficient workers, hidden breaker, misconfigured flag	Check scheduler health API for breaker states; consider increasing workers or reverting flag
Staleness spikes across many instances	Backend API slowdown or connectivity issues	Inspect backend logs, network health; revert flag if duration > 15 min
Dead-letter count climbs rapidly	Downstream API failures	Investigate specific instances via scheduler health API; fix credential/connectivity issues or rollback
Circuit breakers stuck half-open/open	Persistent transient failures	Review error logs, ensure backoff/rate limits not starving retries; rollback if unresolved quickly
Grafana panels flatline	Metrics exporter or job issue	Ensure Prometheus scraping working; verify service restarted with flag

Accessing Scheduler Health API

curl -s http://<host>:7655/api/monitoring/scheduler/health | jq

Key sections to inspect:

• queue.depth, queue.perType
• instances[].pollStatus (success/failure streaks and last error)
• instances[].breaker (current breaker state, retry windows)
• instances[].deadLetter (reason, retry counts, schedules)
• staleness (normalized freshness score)

Common queries:

Instances with errors:

curl -s http://<host>:7655/api/monitoring/scheduler/health \
  | jq '.instances[] | select(.pollStatus.lastError != null) | {key, lastError: .pollStatus.lastError}'

Current dead-letter entries:

curl -s http://<host>:7655/api/monitoring/scheduler/health \
  | jq '.instances[] | select(.deadLetter.present) | {key, reason: .deadLetter.reason, retryCount: .deadLetter.retryCount}'

Breakers not closed:

curl -s http://<host>:7655/api/monitoring/scheduler/health \
  | jq '.instances[] | select(.breaker.state != "closed") | {key, breaker: .breaker}'

When to Roll Back

Rollback immediately if any of the following occurs:

• Queue depth > 3× baseline for > 15 min
• Staleness > 120 s on majority of instances
• Dead-letter count doubles without clear cause
• Customer-facing alerts or latency regressions attributed to adaptive polling

Document the incident and notify stakeholders after rollback.

---

7. Related Documentation

• Scheduler Health API - Complete API reference
• Adaptive Polling Architecture - Technical details
• Management Endpoints - Circuit breaker/DLQ controls
• Configuration Guide - Adaptive polling settings