# Nextcloud Server Service {#services-nextcloud-server}

Defined in [`/modules/services/nextcloud-server.nix`](@REPO@/modules/services/nextcloud-server.nix).

This NixOS module is a service that sets up a [Nextcloud Server](https://nextcloud.com/).

## Features {#services-nextcloud-server-features}

- Declarative [Apps](#services-nextcloud-server-options-shb.nextcloud.apps) Configuration - no need
  to configure those with the UI.
  - [LDAP](#services-nextcloud-server-usage-ldap) app: enables app and sets up integration with an existing LDAP server.
  - [OIDC](#services-nextcloud-server-usage-oidc) app: enables app and sets up integration with an existing OIDC server.
  - [Preview Generator](#services-nextcloud-server-usage-previewgenerator) app: enables app and sets
    up required cron job.
  - [Only Office](#services-nextcloud-server-usage-onlyoffice) app: enables app and sets up Only
    Office service.
  - Any other app through the
    [shb.nextcloud.extraApps](#services-nextcloud-server-options-shb.nextcloud.extraApps) option.
- [Demo](./demo-nextcloud-server.html)
  - Demo deploying a Nextcloud server with [Colmena](https://colmena.cli.rs/) and with proper
    secrets management with [sops-nix](https://github.com/Mic92/sops-nix).
- Access through subdomain using reverse proxy.
- Access through HTTPS using reverse proxy.
- Automatic setup of PostgreSQL database.
- Automatic setup of Redis database for caching.
- Backup of the [`shb.nextcloud.dataDir`][1] through the [backup block](./blocks-backup.html).
- Monitoring of reverse proxy, PHP-FPM, and database backups through the [monitoring
  block](./blocks-monitoring.html).
- [Integration Tests](@REPO@/test/vm/nextcloud.nix)
  - Tests system cron job is setup correctly.
  - Tests initial admin user and password are setup correctly.
  - Tests admin user can create and retrieve a file through WebDAV.
- Access to advanced options not exposed here thanks to how NixOS modules work.

[1]: ./services-nextcloud.html#services-nextcloud-server-options-shb.nextcloud.dataDir

## Usage {#services-nextcloud-server-usage}

### Secrets {#services-nextcloud-server-secrets}

All the secrets should be readable by the nextcloud user.

Secret should not be stored in the nix store. If you're using
[sops-nix](https://github.com/Mic92/sops-nix) and assuming your secrets file is located at
`./secrets.yaml`, you can define a secret with:

```nix
sops.secrets."nextcloud/adminpass" = {
  sopsFile = ./secrets.yaml;
  mode = "0400";
  owner = "nextcloud";
  group = "nextcloud";
  restartUnits = [ "phpfpm-nextcloud.service" ];
};
```

Then you can use that secret:

```nix
shb.nextcloud.adminPassFile = config.sops.secrets."nextcloud/adminpass".path;
```

### Nextcloud through HTTP {#services-nextcloud-server-usage-basic}

:::: {.note}
This section corresponds to the `basic` section of the [Nextcloud
demo](demo-nextcloud-server.html#demo-nextcloud-deploy-basic).
::::

This will set up a Nextcloud service that runs on the NixOS target machine, reachable at
`http://nextcloud.example.com`. If the `shb.ssl` block is [enabled](block-ssl.html#usage), the
instance will be reachable at `https://nextcloud.example.com`.

```nix
shb.nextcloud = {
  enable = true;
  domain = "example.com";
  subdomain = "nextcloud";
  dataDir = "/var/lib/nextcloud";
  adminPassFile = <path/to/secret>;
};
```

After deploying, the Nextcloud server will be reachable at `http://nextcloud.example.com`.

### With LDAP Support {#services-nextcloud-server-usage-ldap}

:::: {.note}
This section corresponds to the `ldap` section of the [Nextcloud
demo](demo-nextcloud-server.html#demo-nextcloud-deploy-ldap).
::::

We will build upon the [Basic Configuration](#services-nextcloud-server-usage-basic) section, so
please read that first.

We will use the LDAP block provided by Self Host Blocks to setup a
[LLDAP](https://github.com/lldap/lldap) service.

```nix
shb.ldap = {
  enable = true;
  domain = "example.com";
  subdomain = "ldap";
  ldapPort = 3890;
  webUIListenPort = 17170;
  dcdomain = "dc=example,dc=com";
  ldapUserPasswordFile = <path/to/ldapUserPasswordSecret>;
  jwtSecretFile = <path/to/ldapJwtSecret>;
};
```

We also need to configure the `nextcloud` Self Host Blocks service to talk to the LDAP server we
just defined:

```nix
shb.nextcloud.apps.ldap
  enable = true;
  host = "127.0.0.1";
  port = config.shb.ldap.ldapPort;
  dcdomain = config.shb.ldap.dcdomain;
  adminName = "admin";
  adminPasswordFile = <path/to/ldapUserPasswordSecret>;
  userGroup = "nextcloud_user";
};
```

The `shb.nextcloud.apps.ldap.adminPasswordFile` must be the same as the
`shb.ldap.ldapUserPasswordFile`. The other secret can be randomly generated with `nix run
nixpkgs#openssl -- rand -hex 64`.

And that's it. Now, go to the LDAP server at `http://ldap.example.com`, create the `nextcloud_user`
group, create a user and add it to the group. When that's done, go back to the Nextcloud server at
`http://nextcloud.example.com` and login with that user.

Note that we cannot create an admin user from the LDAP server, so you need to create a normal user
like above, login with it once so it is known to Nextcloud, then logout, login with the admin
Nextcloud user and promote that new user to admin level.

### With OIDC Support {#services-nextcloud-server-usage-oidc}

:::: {.note}
This section corresponds to the `sso` section of the [Nextcloud
demo](demo-nextcloud-server.html#demo-nextcloud-deploy-sso).
::::

We will build upon the [Basic Configuration](#services-nextcloud-server-usage-basic) and [With LDAP
Support](#services-nextcloud-server-usage-ldap) sections, so please read those first and setup the
LDAP app as described above.

Here though, we must setup SSL certificates because the SSO provider only works with the https
protocol. This is actually quite easy thanks to the [SSL block](blocks-ssl.html). For example, with
self-signed certificates:

```nix
shb.certs = {
  cas.selfsigned.myca = {
    name = "My CA";
  };
  certs.selfsigned = {
    nextcloud = {
      ca = config.shb.certs.cas.selfsigned.myca;
      domain = "nextcloud.example.com";
    };
    auth = {
      ca = config.shb.certs.cas.selfsigned.myca;
      domain = "auth.example.com";
    };
    ldap = {
      ca = config.shb.certs.cas.selfsigned.myca;
      domain = "ldap.example.com";
    };
  };
};
```

We need to setup the SSO provider, here Authelia thanks to the corresponding SHB block:

```nix
shb.authelia = {
  enable = true;
  domain = "example.com";
  subdomain = "auth";
  ssl = config.shb.certs.certs.selfsigned.auth;

  ldapEndpoint = "ldap://127.0.0.1:${builtins.toString config.shb.ldap.ldapPort}";
  dcdomain = config.shb.ldap.dcdomain;

  secrets = {
    jwtSecretFile = <path/to/autheliaJwtSecret>;
    ldapAdminPasswordFile = <path/to/ldapUserPasswordSecret>;
    sessionSecretFile = <path/to/autheliaSessionSecret>;
    storageEncryptionKeyFile = <path/to/autheliaStorageEncryptionKeySecret>;
    identityProvidersOIDCHMACSecretFile = <path/to/providersOIDCHMACSecret>;
    identityProvidersOIDCIssuerPrivateKeyFile = <path/to/providersOIDCIssuerSecret>;
  };
};
```

The `shb.authelia.secrets.ldapAdminPasswordFile` must be the same as the
`shb.ldap.ldapUserPasswordFile` defined in the previous section. The secrets can be randomly
generated with `nix run nixpkgs#openssl -- rand -hex 64`.

Now, on the Nextcloud side, you need to add the following options:

```nix
shb.nextcloud.ssl = config.shb.certs.certs.selfsigned.nextcloud;

shb.nextcloud.apps.sso = {
  enable = true;
  endpoint = "https://${config.shb.authelia.subdomain}.${config.shb.authelia.domain}";
  clientID = "nextcloud";
  fallbackDefaultAuth = false;

  secretFile = <path/to/oidcNextcloudSharedSecret>;
  secretFileForAuthelia = <path/to/oidcNextcloudSharedSecret>;
};
```

Passing the `ssl` option will auto-configure nginx to force SSL connections with the given
certificate.

The `shb.nextcloud.apps.sso.secretFile` and `shb.nextcloud.apps.sso.secretFileForAuthelia` options
must have the same content. The former is a file that must be owned by the `nextcloud` user while
the latter must be owned by the `authelia` user. I want to avoid needing to define the same secret
twice with a future secrets SHB block.

### Tweak PHPFpm Config {#services-nextcloud-server-usage-phpfpm}

```nix
shb.nextcloud.phpFpmPoolSettings = {
  "pm" = "dynamic";
  "pm.max_children" = 800;
  "pm.start_servers" = 300;
  "pm.min_spare_servers" = 300;
  "pm.max_spare_servers" = 500;
  "pm.max_spawn_rate" = 50;
  "pm.max_requests" = 50;
  "pm.process_idle_timeout" = "20s";
};
```

### Tweak PostgreSQL Settings {#services-nextcloud-server-usage-postgres}

These settings will impact all databases.

```nix
shb.nextcloud.postgresSettings = {
  max_connections = "100";
  shared_buffers = "512MB";
  effective_cache_size = "1536MB";
  maintenance_work_mem = "128MB";
  checkpoint_completion_target = "0.9";
  wal_buffers = "16MB";
  default_statistics_target = "100";
  random_page_cost = "1.1";
  effective_io_concurrency = "200";
  work_mem = "2621kB";
  huge_pages = "off";
  min_wal_size = "1GB";
  max_wal_size = "4GB";
};
```

### Backup the Nextcloud data {#services-nextcloud-server-usage-backup}

TODO

### Enable Preview Generator App {#services-nextcloud-server-usage-previewgenerator}

The following snippet installs and enables the [Preview
Generator](https://apps.nextcloud.com/apps/previewgenerator) application as well as creates the
required cron job that generates previews every 10 minutes.

```nix
shb.nextcloud.apps.previewgenerator.enable = true;
```

Note that you still need to generate the previews for any pre-existing files with:

```bash
nextcloud-occ -vvv preview:generate-all
```

### Enable OnlyOffice App {#services-nextcloud-server-usage-onlyoffice}

The following snippet installs and enables the [Only
Office](https://apps.nextcloud.com/apps/onlyoffice) application as well as sets up an Only Office
instance listening at `onlyoffice.example.com` that only listens on the local network.

```nix
shb.nextcloud.apps.onlyoffice = {
  enable = true;
  subdomain = "onlyoffice";
  localNextworkIPRange = "192.168.1.1/24";
};
```

Also, you will need to explicitly allow the package `corefonts`:

```nix
nixpkgs.config.allowUnfreePredicate = pkg: builtins.elem (pkgs.lib.getName pkg) [
  "corefonts"
];
```

### Enable Monitoring {#services-nextcloud-server-server-usage-monitoring}

Enable the [monitoring block](./blocks-monitoring.html). The metrics will automatically appear in
the corresponding dashboards.

### Enable Tracing {#services-nextcloud-server-server-usage-tracing}

You can enable tracing with:

```nix
shb.nextcloud.debug = true;
```

Traces will be located at `/var/log/xdebug`.

See [my blog
post](http://blog.tiserbox.com/posts/2023-08-12-what%27s-up-with-nextcloud-webdav-slowness.html) for
how to look at the traces.

## Demo {#services-nextcloud-server-demo}

Head over to the [Nextcloud demo](demo-nextcloud-server.html) for a demo that installs Nextcloud with or
without LDAP integration on a VM with minimal manual steps.

## Maintenance {#services-nextcloud-server-maintenance}

On the command line, the `occ` tool is called `nextcloud-occ`.

## Debug {#services-nextcloud-server-debug}

In case of an issue, check the logs for any systemd service mentioned in this section.

On startup, the oneshot systemd service `nextcloud-setup.service` starts. After it finishes, the
`phpfpm-nextcloud.service` starts to serve Nextcloud. The `nginx.service` is used as the reverse
proxy. `postgresql.service` run the database.

Nextcloud' configuration is found at `${shb.nextcloud.dataDir}/config/config.php`. Nginx'
configuration can be found with `systemctl cat nginx | grep -om 1 -e "[^ ]\+conf"`.

Enable verbose logging by setting the `shb.nextcloud.debug` boolean to `true`.

Access the database with `sudo -u nextcloud psql`.

Access Redis with `sudo -u nextcloud redis-cli -s /run/redis-nextcloud/redis.sock`.

## Options Reference {#services-nextcloud-server-options}

```{=include=} options
id-prefix: services-nextcloud-server-options-
list-id: selfhostblocks-service-nextcloud-options
source: @OPTIONS_JSON@
```
