269 commits

Author	SHA1	Message	Date
Daniel	1242b01286	feat: Exa as a search source; the speech buttons say what they do ... Two unrelated small things in the admin. Exa searches by meaning rather than keywords, which suits a clinical question asked as a question — the shape the assistant actually sends. It is also the only provider that returns the page text in the same call, and the snippet is the part the model reads, so asking for it there saves a second fetch per result. type is 'auto' rather than 'neural': pinning neural makes it worse at the keyword-shaped queries the other four handle well. One adapter, one dropdown entry, no other change — the route already validated against webSearch.PROVIDERS, so the backend accepted it the moment the list grew. A test now walks both lists in both directions: a provider the server takes but the admin never offers is unreachable, and one the admin offers but the server rejects is a setting that cannot be saved. The speech and transcription buttons said "Set". Directly beneath them is a Roster card headed "What has been added", and Set is the one thing that does not add anything — there is a single voice and a single model, and choosing one replaces the last. They now say "Make default", and the note says plainly that nothing joins a list. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-13 01:58:20 +02:00
Daniel	d33d355627	feat: a streaming table renders as a table, and the wait says what it is doing ... Measured against Open WebUI on the same question, sampling every 250ms: it never showed a raw pipe. A real <table> appeared with 2 rows at t+3.25s and grew to 4, then 6, as they arrived. The blank-line rule alone cannot do that, and a table is the case it serves worst: a markdown table contains no blank line, so the whole of it stayed in the tail as plain text until the line *after* it landed, then snapped into place. That is the markdown flash, on exactly the content where it shows most. So a table is now rendered while it is still arriving: once there is a header, the |---| rule and one body row, the tail is rendered as markdown rather than held as text, and every complete row that follows joins it. A half-typed row is left out and appears a frame later, which is what makes the table grow a row at a time. Re-rendered each frame rather than appended, unlike a settled block: the rows arriving next carry no header of their own, so they cannot be parsed as a separate chunk. The tail is small, so the cost is small. The status was the other half of that trace: Open WebUI keeps a skeleton beside the streaming content until the answer is done. Ours removed the status the instant the first token landed — the moment it becomes most useful, because the answer is arriving *and* the assistant is still working, drawing a figure or completing a cut-off reply. It now sits above the partial answer, shimmering, until the final render replaces the bubble. And the wait itself says what is happening. Retrieval finishes before the stream opens — deliberately, so a bad request still returns an error rather than a stream — which makes that first line the only thing a reader has during the slowest part. "Retrieving and synthesizing references" described the software; "Searching the clinical library" describes the work. Mutation-tested: dropping the table rule, rendering the incomplete trailing row, showing a table with no body row, or failing to restore the status each frame all fail a test. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-13 01:55:09 +02:00
Daniel	c14fa25c3f	fix: the image settings card can save again; Learning Hub is out of the admin ... "Not all of it was saved: Workflow not found" on every press of Save availability. The card sent image settings for three workflows, and the server has only had two since Learning Hub was removed — the DB constraint allows clinical_assistant and my_resources and nothing else. One rejection failed the whole save, so the two settings that were valid looked unsaved as well. The frontend was the only place that still believed in it. Also gone: the learning_hub.image_behavior prompt, its Learning prompts section in the admin — which held that one prompt and nothing else — and the theme's card tints, which never applied. While there: My Resources had a Model dropdown labelled "set per request", permanently disabled and permanently empty. A control that can never do anything reads as broken rather than as not applicable, so it is now a sentence saying where the model is actually chosen. Its fallbacks stay — those apply to whichever model the request picked. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-13 01:39:15 +02:00
Daniel	3a40ff9b6d	fix: the theme reaches the renderer, so changing it changes the deck ... Picking a theme on a saved resource did nothing. The picker saved the choice, the route wrote deck.theme, and the renderer knew how to apply it — the theme was lost in between. attachFigures, the step that puts drawn figures back onto slides, rebuilds the deck as a fresh object: var out = { title, subtitle, date, slides }; A fresh object keeps only the fields it names, and theme was not one. So every export rendered in the default palette, whatever the picker said. Rendering the same deck under clinical-blue, teaching-amber and high-contrast produced three byte-identical files; it now produces three different ones, and they look different. Silent, because nothing downstream could tell the difference between a deck with no theme and a deck whose theme had been dropped — both mean "use the default", which is also the right behaviour for an unknown id. Known and not fixed here: the two tinted cards on a compare slide are hardcoded blue and amber rather than taken from the theme, so those stay the same colour under every palette. The headings, accent, rules and bullets do change. That is a gap in the theme definition, not in this path. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-13 01:25:31 +02:00
Daniel	993442f98a	feat: the API describes itself, at /api/openapi.json ... docs/api-reference.md was hand-written, and by the time anyone checked it was documenting twenty-three endpoints that answer 404 while missing others that exist. That is what hand-written reference material does: it is correct on the day it is written and silently wrong afterwards. A second hand-written document, in YAML this time, would rot the same way. So paths, methods and mount points are read from the Express router stack at request time. They cannot disagree with the app, because they are the app: 186 paths, 215 operations, and — checked — no /learning endpoints, which is what the prose version went on claiming for weeks after that feature was deleted. What introspection cannot know is what an endpoint is *for*. That half lives in src/utils/openapiRoutes.js, keyed by "METHOD /path", and it is the half that rots, so it is the half that is enforced: a Playwright spec fetches the live document and fails when the number of operations without a summary rises above 199 — the debt as measured today. A ratchet, not a target. Adding an endpoint pushes the count over and fails the build; describing one lowers the number. The failure lists the operations by name, so it says what to write. Whether an operation is public is stated per route rather than inferred from middleware. Guessing wrong there is worse in both directions: calling a public endpoint protected hides a hole, and the reverse invites a bug report. The contract spec lives in e2e rather than the unit suite because it needs the whole app mounted, and requiring server.js from node:test pulls in the database pool and hangs the run — that has happened here before. Also: e2e now runs in CI on dev, gated by a shell check inside the step rather than a job-level "if", which this Forgejo dispatches anyway and then kills with "Early termination". Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-13 00:52:55 +02:00
Daniel	36cb742ce7	ci: fix the failing job, split deploy out, and drop the Android build ... Three things, one subject: making CI say the truth about this repo. ## The red on every run was ours, not the runners' Every docker-build run came back success, success, failure — the same shape for weeks. The failing job was `deploy`, and it was failing to *not run*: if: ${{ github.event.inputs.deploy == 'true' }} On a push there is no github.event.inputs at all. This Forgejo does not treat that as false and skip; it dispatches the job, the runner cannot resolve it, and the task ends in "Early termination". The runners were never at fault, and nothing about them needed changing. The `'runs-on' key not defined` line is a red herring: the `build` job prints it too and succeeds. It names the job's *needs* target, not the job, and the old android-apk workflow used `needs:` happily for months. Deploy is now its own workflow with only workflow_dispatch — no condition to evaluate, so nothing can be dispatched by mistake. No job in either file now carries a job-level `if`. The one conditional left is a *step* (push to registry), and step conditions are evaluated by the runner once the job is already running, which is why that one has always worked. ## dev and main docker-build now runs on `dev` as well. Both branches prove the same two things — tests pass, image builds — and only `main` publishes the image, so nothing on `dev` can be mistaken for something deployable. Deploying stays a person pressing a button after looking at the change. CONTRIBUTING.md documents the flow. ## Android Removed: the mobile/ Capacitor project, docs/mobile-build.md, and the Android bits of scripts/release.sh. All of it is in git history — 4613a278 is the last commit that had it — for when it is rebuilt. src/utils/platform.js stays. isMobileClient only decides token lifetime, it is twelve lines, and it is the contract a future app would come back to; deleting it would be a change to auth for no gain. .github/workflows/ went too — all five. There is no GitHub remote on this repository, so none of them has ever run, and two of them wrote into mobile/ paths that no longer exist. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 23:30:52 +02:00
Daniel	5f738fbe30	feat: a theme is shown by a sample deck you download, not a picture ... A picture of one slide answers a narrower question than the one a theme picker is asked. What a person wants to know is what a deck will look like in this theme — all of it, at the size it will be shown, with the fonts substituted the way they will be. One rendered slide showed one layout, in content someone then read instead of looking at. So: a sample deck per theme. Every layout the renderer can draw — title, bullets with a sub-point, both two-column forms, table, callout, figure, full-slide figure, section divider, a custom slide with shapes, an arrow and a chart, and a references slide — with filler text throughout. Download it, open it, see the theme. The text is deliberately meaningless. Clinical content in a specimen invites you to read it, and then you are judging the teaching rather than the type; that is what the old croup slide got wrong. No engine. The previous preview needed a Gotenberg round trip and a pdftoppm to produce a PNG, cached on disk because of what it cost, and could fail in ways a missing picture cannot explain. python-pptx builds the file in ~330ms and PowerPoint draws it. The link is a plain anchor, so it is there whether or not anything on the server is well. The figure placeholder rides the same path a generated figure does — attachFigures downgrades a figure slide with no picture to bullets and an image slide to a section, so without it the sample would silently stop showing those two layouts. Verified: all five themes build, 11 slides, the chart is a real chart and the placeholder embeds as real media. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 22:24:05 +02:00
Daniel	8602c7bd14	fix: the theme preview says what it is doing, and says when it fails ... The box was hidden until an image loaded and hidden again on error, so a preview that failed and a preview that did not exist looked identical — an empty gap under the dropdown. That is what it looked like from the outside, and it cost a diagnosis: the endpoint renders a correct 934x525 PNG in 0.66s when called exactly as the browser calls it, cookie and all, and nothing on the page could have told anyone that. The first view of a theme is a pptx render, a Gotenberg round trip and a pdftoppm — a second or so before anything appears, and then cached on disk. A second of silence reads as a feature that is not there, so it now says it is drawing, and on failure says the look itself is unaffected, which is true: the preview is a picture of the export, not the thing that produces it. img.src is assigned after both handlers. A cached preview can complete before a handler attached below the assignment exists, which would leave the box stuck on "Drawing...". describeTheme already ends by calling it, so the call sitting beside it fired a second identical request on every load. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 21:56:22 +02:00
Daniel	a505244b97	refactor: remove the embedding settings, whose only consumer is gone ... Embeddings existed here for Learning Hub semantic search — the card said so itself. Learning Hub was removed, and nothing took its place: the clinical corpus is embedded by the indexing service, not by this app. What was left was a settings page that configured a model, tested it, reported its dimensions, and fed nothing. src/utils/embeddings.js had exactly one importer, src/routes/adminConfig .js, which used it for the three routes this deletes. Outside those, the only mentions of embedding in the server were a comment and a settings prefix. Gone: the module, its three admin routes, the dimension probe, the Discover & test kind and its two panels, the admin.js block behind them, the embeddings. prefix from both the writable-settings allowlist and the lockdown list (it can no longer be written at all, so locking it says nothing), and docs/embeddings-setup.md, which documented Learning Hub search end to end. 'embedding' stays in NON_CHAT_MODES — that is the filter keeping embedding models out of the chat-model list, and the gateway still serves them. Docs still describe nine /api/learning endpoints that no longer exist, left from the Learning Hub removal. Not touched here; that is its own subject. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 21:47:09 +02:00
Daniel	9df2230479	refactor: rebuild the admin settings page around what each card does ... The page had grown by accretion: model discovery scattered across five cards with a search box each, one Save writing eight keys from the bottom of a card that also held a second Save for something else, and a banner apologising that a button "applies only the settings above it". Now it reads in groups — Accounts, Models, Assistant & prompts, Site — and every card is a <details> that folds, so Save & Close means something. The rule is that each card saves exactly what it shows, which is what removed the need for the banner. Models is one workflow in three steps. Discover & test has a single search box and a kind switch (chat / image / speech / transcription / embedding); the five discovery calls are unchanged, the switch only decides which one answers. Roster is what has been added, including the image roster, which had no visible list before. Availability is the chat model, the two allowed lists, the per-workflow image settings and the slide reviewer, under one Save. Splitting the eight-key save follows from that rule: Save & Close writes the five retrieval and citation keys; Save availability writes the chat model, both allowed lists, the reviewer and the three image-settings PUTs. No route, request shape or setting key changed. Switching kind clears the results first — a row button would otherwise add an image model to the chat roster. The kind switch dispatches its event through document.defaultView's CustomEvent. jsdom refuses one built from another realm, and the existing announceModelsChanged() has exactly that bug: its event is built from the Node global, dispatchEvent refuses it, and a try/catch swallows the error — so models-changed propagation has only ever been source-grepped, never actually tested. Left alone here to keep this change to one subject. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 21:42:27 +02:00
Daniel	c68e3a6219	fix: "Sign in with Nextcloud" opens the sign-in page ... The button did nothing. It claimed a blank tab during the click and pointed it at the login URL once the request returned — the standard way around a popup blocker, and it cannot work in this app: helmet sends Cross-Origin-Opener-Policy: same-origin, which severs the handle to that tab the moment it goes cross-origin. Assigning its location was a no-op. A blank tab opened, nothing else happened. The handle was never needed. window.open with 'noopener' asks for none, and a click's user activation outlives the fetch, so the browser does not treat it as a popup. The status line now also carries the sign-in URL as an ordinary link, so there is a way through whatever any particular browser decides about opening windows. Verified the server side against the real Nextcloud first: the flow starts, both returned URLs pass the SSRF guard and the same-host check. The fault was entirely in the browser. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 21:36:51 +02:00
Daniel	89e71b3b86	fix: stream the assistant's answer a block at a time ... Markdown only means anything once a block is finished. Half a table is a row of pipes; half a fence is a stray ```. Re-parsing the whole partial answer every 180ms therefore flickered between a broken parse and the real thing, and the previous answer to that was to abandon markdown past 3500 characters or eight pipe rows and dump raw text into a <pre> that had no CSS at all — inheriting the browser's black monospace default. That is the dark block people saw while a table streamed. Now the text is split at the last finished block — a blank line outside a code fence — and everything before it is rendered once and *appended*. Only the unfinished tail is plain text, styled as prose. Settled content is never re-parsed and never rebuilt, so a diagram or chart that has already drawn is not thrown away by the next token. Two blank lines are not boundaries: the gap inside a loose list, which would render one list as two each restarting at 1, and one inside indented code. Telling the first from the perfectly good boundary between a sentence and the list it introduces takes looking at both sides of the gap, not just ahead. renderEmbeddedBlocks now marks what it has drawn. mermaid.render is async and replaces the element; a second Chart on one canvas throws. Marked before the await, not after, or two frames race the same element. Streaming is a preview: 'done' still renders the whole answer from scratch, so anything transient here is settled by the final pass. That is what makes appending safe. Mutation-tested: removing fence tracking, the list guard, the backward half of that guard, the append, the drawn marker, or the state reset in fillMessageBubble each fail a test. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 21:36:51 +02:00
Daniel	a7132c218e	feat: a ciphertext now only decrypts in the row it was written for ... enc1 said what a value was but not where it belonged. The blob in one user's nextcloud_token would decrypt perfectly if copied onto another user's row, and that account's exports would then go into someone else's storage. Nothing about the ciphertext objected. Adds enc2, which binds a context string — 'users:nextcloud_token:41' — as AES-GCM additional authenticated data. The auth tag covers it, so a moved ciphertext fails to open rather than opening somewhere wrong. The context is authenticated, not encrypted: it is not a secret, it is a claim about location. enc1 is still read, unchanged and forever — every existing row is enc1. Bound rows are distinguishable (isBound), so the Nextcloud token is rebound in place the next time it is successfully used, the same way a legacy plaintext one was already upgraded. That gate moved from isEncrypted to isBound; isEncrypted is true for enc1, so it would have skipped exactly the rows that need rebinding. Bound so far: Nextcloud app passwords, and invite codes — which bind to their own code_hash, since unlike the row id that exists at INSERT time. Decrypting an invite moved into list(), so the cipher and the hash that opens it no longer leave the module together. Mutation-tested: dropping the AAD, dropping the guard, gating on isEncrypted, or dropping a context at a call site each fail a test. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 21:25:24 +02:00
Daniel	ba66a80491	chore: checkpoint before AAD binding and incremental streaming render ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 21:17:35 +02:00
Daniel	191b3b433b	wip: invite codes stay copyable	2026-09-12 21:00:22 +02:00
Daniel	46112e1221	feat: connect Nextcloud by signing in to Nextcloud ... Asking someone to find Settings → Security → Create new app password is a poor first run, and it is the step people give up on. Nextcloud has its own answer: Login Flow v2. The person enters their server address, signs in on Nextcloud the way they normally do — SSO, 2FA, a password manager — and Nextcloud generates an app password for this app. We never see their real password. Pasting an app password still works, behind "Use an app password instead". It is the fallback, not the front door. The security of this is all in what is trusted. The remote server chooses both the login URL and the poll endpoint, so both are SSRF-checked and both must be on the host the person actually typed — an endpoint pointing elsewhere would make this a request-forgery gadget aimed at whatever it named. The server Nextcloud reports at the end is re-checked before it is stored. The poll token is a credential, so polling happens server-side and the browser holds only an opaque handle bound to its own account. Flows live in memory with a 20 minute life, matching Nextcloud's own expiry: a login lasts minutes, and a restart mid-flow is a retry rather than a loss. Starting a second flow replaces the first, which is what clicking again means. The tab is opened from the click itself, before the request — opening it after an await is what a popup blocker stops. Removed with Learning Hub: the WebDAV browse path. Its field, its route and its column are gone, since nothing browses Nextcloud any more. nextcloud_folder is a different column and still in use. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 20:55:00 +02:00
Daniel	24c8d71b7e	feat: send a resource to your own Nextcloud, as the rendered file ... A .pptx landing in someone's own storage is worth having; a markdown blob is not, and it is not what they would have downloaded. So this renders through exactly the path the download uses — stored deck, its figures, the chosen theme — and PUTs the bytes. The file never travels through the browser. Offered only when a Nextcloud is connected: an action that always fails is worse than one that is not offered. An article offers Word, a deck PowerPoint, and asking for slides from an article is refused with the reason. Putting a file in Nextcloud now lives in src/utils/nextcloudFiles.js. Two callers want it and neither should grow its own copy of the WebDAV dance — make the dated folder a segment at a time, PUT, migrate a legacy plaintext token — because it reaches into storage that is not ours and a second slightly different copy is how the two drift. It also replaces a route importing another route. Also: a model that leaves the roster now leaves every list that names it. clinical_assistant.allowed_models and the image roster are advisory copies of the roster, and a stale id there was invisible until someone asked a clinical question and the request failed at the gateway. Removing or disabling a model prunes it; clearing the roster clears them. Re-enabling deliberately does not re-allow it — that is a separate decision. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 20:34:58 +02:00
Daniel	025290d64a	feat: retire Learning Hub ... My Resources generates better slides than Learning Hub ever did — a typed deck the model fills in, rendered by python-pptx with fit-to-slide text, figures, a vision review and themes, against Learning Hub's markdown-through-pandoc — and the articles and quizzes now live in the quiz app. Keeping a second, weaker generator and a whole CMS beside it was not earning its maintenance. Removed: three routers, the Learning Hub and Content Manager tabs, their components and frontend modules, the five database tables, the WebDAV browser, the content embedding column and its vector index. Content was exported first — every article as markdown plus a full SQL dump of all five tables — to ops-backups/learning-hub-export-*. That export is the restore path; the migration's down() can recreate the shape but never the rows, and says so. Two things this simplifies rather than merely deletes: generated_image_links existed only to record which published content an image appeared in, and it was the sole reason a generated image could be read by someone who did not make it. Images are now owner-only — the visibility rule is one WHERE clause instead of a join across two tables and a published flag. embeddings.js keeps the model discovery the admin panel uses and loses searchSimilar and generateContentEmbedding, which queried a table that no longer exists. Kept deliberately: Nextcloud connect, disconnect and export, which are how a generated note reaches a real filesystem and have nothing to do with Learning Hub; learningRetrieval, which despite its name is the clinical corpus search My Resources depends on; and the pandoc reference deck, still the fallback when the python renderer fails, moved from assets/learning to assets/deck now that the old name misleads. Tests: four Learning-Hub-only files removed, and the individual cases inside shared files that asserted its behaviour. Where a test used a Learning endpoint only as a convenient example — the account-boundary token test, the policy matrix — it now uses one that still exists, so the property it proves is unchanged. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 20:14:20 +02:00
Daniel	59226f2109	feat: deck themes — a palette you pick, previewed by the renderer itself ... A deck had exactly one look. The slide vocabulary is structural — bullets, compare, table, callout, figure — and none of it carries a colour, so "make it yellow" had nowhere to land but the image prompts, and produced yellow figures on a blue deck. A theme is a palette and a typeface in assets/deck-themes.json. render_pptx.py rebinds INK, MUTED, ACCENT, RULE and PAPER from it in one place, so every slide builder follows without a line changing in any of them — five themes restyle ten slide types for free. An unusable theme leaves the default standing, because a deck in the wrong colours beats a deck that will not render. The theme rides on the deck, which is already the renderer's spec, so nothing has to thread it through. It is validated against the same catalogue the renderer reads: an id the renderer would ignore is never stored, so a deck cannot claim a look it does not have. PUT /my-resources/:id/theme re-skins a stored deck — a column write, no model call, nothing that can reword a slide — and the next download is in the new colours. Offered in the library only on rows that have a deck; flat markdown has no palette. Previews are rendered by the renderer, one representative compare slide per theme, cached because each costs a pptx render, a Gotenberg round trip and a rasterise. Drawn rather than mocked up: a hand-made swatch drifts the moment a palette or a layout changes, and a preview that is not true is worse than none. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 19:40:19 +02:00
Daniel	bf4f895f2c	fix: article uploads are 10 MB, type-checked both ways, and sniffed ... The ceiling was 100 MB per file with ten files allowed at once, and every file is held whole in memory to be parsed — so the old limit let a single request ask for a gigabyte of heap. A source article that size is not a thing anyone uploads here. Now 10 MB, defined once and used by both the multer limit and the post-upload check. The filter accepted `allowed mime OR allowed extension`, so naming a file .pdf was enough on its own, whatever it declared — and the extension is chosen by whoever uploads. Both are required now. Neither of those sees any bytes: multer filters on the headers, before the file has arrived. verifySources() runs once the buffer exists and refuses a file whose contents are not what its type claims, using the same helper as documents, S3 uploads and assistant attachments. It runs before extraction, because an extractor handed a malformed file is where the damage would happen. The CMS screen said 100 MB and listed four of the ten accepted formats; it now says what the server actually does. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 19:25:41 +02:00
Daniel	bd8e413bc7	fix: an assistant attachment must be the image type it claims to be ... The MIME type was taken on trust here. Anything at all could be posted as image/png: it passed the size and base64 checks, was stored in the saved chat, and was handed to a provider as a data URI. Documents and S3 uploads have always been sniffed by fileType.js; this was the one upload path that was not. Now sniffed with the same helper, so there is one idea of what a PNG looks like. A PHP payload, a shell script, an ELF or PE binary, a zip, or a real PDF labelled image/png are all refused with a message that says what is wrong. What this does not claim: bytes hidden after a valid PNG header still make a valid PNG, and no sniffer can promise otherwise. The protection is that the file is never executed and never served as anything but an image. Existing fixtures used buffers of 0x07 as stand-in images, which are correctly refused now. They carry real file headers instead — a fixture should be the thing it claims to be, exactly like a real upload. Also adds the deck theme system: five palettes in assets/deck-themes.json, render_pptx.py rebinding its palette from the theme rather than hardcoding it, the theme carried on the deck and validated against the same catalogue the renderer reads, a picker on the generate form, and PUT /my-resources/:id/theme to re-skin a stored deck with no model call. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 19:00:10 +02:00
Daniel	74aa0c1b89	feat: Enter sends in the assistant, and the person chooses ... Enter made a newline and Ctrl+Enter sent, which is backwards from every chat people use. Enter now sends by default, with a toggle in the composer's + menu to put it back. Two rules hold whatever is chosen, because they are the habits people arrive with and a setting that broke either would be worse than no setting: Shift+Enter is always a newline, Ctrl/Cmd+Enter always sends. Both are checked before the preference, so neither can be switched off. A keystroke during IME composition never sends. Enter accepts a candidate word in Chinese, Japanese and Korean, and on predictive Android keyboards; sending there would cut a sentence off mid-word. Stored per device rather than per account, because a keyboard preference belongs to the keyboard: Enter-to-send suits a desk and usually does not suit a phone, where Enter is how you get a second line. Unset, it defaults by device class — send where there is a real keyboard, newline on a touch screen — and a blocked localStorage falls through to that default rather than throwing. The composer's tooltip says which key sends, where someone already looks when they wonder. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 18:05:36 +02:00
Daniel	b1e039d834	fix: a newly added model reaches every picker, including the user-facing ones ... The first pass at this covered the two admin cards. It missed the pickers that matter most: the per-tab model selectors in app.js, which every clinical tab uses, and the My Resources model dropdown. Both were filled once at page load, so a model added in Admin was still invisible where people actually choose one. app.js's boot fetch is now a named loadModelList() that also runs on models-changed; My Resources re-runs loadOptions(), which is the same call that decides whether the model row is shown at all. Both rebuilds keep a choice already made. These selects can be rebuilt while someone is halfway through a form, and silently moving them off the model they picked would be worse than not refreshing. Verified against a mutation: removing the app.js listener fails the test that says every picker listens. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 17:46:18 +02:00
Daniel	7305443243	fix: the last run's illustration no longer sits under an empty form ... app.js loads a tab's component once and marks it data-loaded, so the DOM survives leaving and returning. Nothing cleared the result area, and an illustration from a previous generation stayed on screen under a blank form as though it were output for a topic nobody had typed. A full page refresh rebuilt the component and cleared it, which is why it looked like a leak that fixed itself. Cleared at the start of a generation, at the start of a modification, and on re-entering the tab — not on the first visit, where there is nothing to clear. Covers the illustration area, the searches line, the image-failure line and the status text. Also documented what a modification can actually change. The deck vocabulary is structural — bullets, compare, table, callout, figure, image, section, title — and none of those carries a colour; the palette is fixed in render_pptx.py and the model never sees it. So "make it yellow" lands on the only field that takes a colour, image_prompt, and yellow figures appear on an otherwise blue deck. That is not modify reaching only the images; it is the model using the one lever the schema gives it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 17:43:19 +02:00
Daniel	31e634e0ce	fix: a model added in Admin now appears everywhere models are chosen ... Adding a discovered model refreshed exactly one dropdown — the default-model one, in the same card. Every other picker had been filled when the admin tab loaded, behind a guard that makes its loader run once per visit, so the Clinical Assistant chat model, the allowed-models list, the slide reviewer and the image-model selects all kept the roster they were given. The model was genuinely added; it simply could not be selected until the page was reloaded, which reads as the add having failed. Every mutation of the roster — add, remove, clear-all, enable/disable — now dispatches `models-changed`, and the cards that list models listen and refetch. The event carries no payload: a listener re-reads the list itself, so there is one source of truth rather than a copy to keep in step. Same pattern as the existing `assistant-image-roster` event. Each listener clears its own guard before re-running, and returns early if a load is already in flight. The assistant loader keeps unsaved drafts, so re-running it costs nothing but a refreshed set of options. The add toast said "now select it as default and click Set Default" — advice that only made sense when the default dropdown was the one thing that updated. Verified against a mutation: removing the guard reset fails the propagation test, because the listener then fires into a loader that returns early. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 17:39:49 +02:00
Daniel	ff2b2bc9d3	chore: Kitten and Supertonic retired; Kokoro is the local voice ... Both were removed from the gateway in favour of Kokoro, so the app's curated voice lists for them went too. Kokoro's own check no longer has to exclude them — it names its own voices and the list is open, so it accepts anything that is not another family's voice. Voices stay curated per family rather than discovered. Models are discovered from /model/info; voices are not, because no TTS provider exposes its voice list consistently, and a list guessed from a model id is how a picker ends up offering a voice the provider rejects. Tests that pinned the retired voices now pin the families that remain. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 16:45:05 +02:00
Daniel	fce05a2749	fix: the active library view is unmistakable, and a leading question cannot mislead the vision model ... Documents and Images were two buttons of the same weight, which reads as two buttons rather than as a current view and an alternative. The active one now carries the surface, the weight and a hairline — keyed off aria-selected, so the visible highlight and what a screen reader announces cannot disagree. The look_at_image question is written by a model that has not seen the image, from what the user said, so it can presume something that is not there — "describe this rash" about a photograph of a drug chart. Answering the presumption would send it back as fact. The seeing model is now told the question may assume something absent, and to say so first and describe what is actually there. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 16:27:21 +02:00
Daniel	1f06a19007	feat: a text-only model can ask a model that can see; and the image regex is gone ... **The regex is gone.** The route ran a pattern over the user's message and enqueued an image from the answer text when the model had not called the tool. It was a compatibility path for models without tool calling and it did more harm than good: it decided in English only, it could not see the conversation, and "image summary" fell through it while reading as an obvious image request to the model itself — which was measured, not assumed. A second and worse decision-maker sitting behind the first. Whether a message deserves a picture is now the model's call, made from the tool description, which is the only place it ever belonged. **Lending eyes.** The same shape, for a different capability. When someone attaches a photograph and the chat model cannot accept image input, the attachment was either refused by the provider or silently dropped — an answer about a picture nobody had looked at, which is worse than a refusal. The chat model is now offered look_at_image beside the image tool and decides when to use it. The attachment goes to clinical_assistant.vision_model, whose description comes back as a tool result, and the chat model answers in its own voice with its own sources. Only the seeing is delegated; the clinical reasoning stays with the model an administrator chose. The seeing model is told to report and not to diagnose, because it has a picture and no context and an opinion from it would carry weight it has not earned. Delegation triggers only on an explicit supports_vision: false from the gateway. An unknown is left alone — most of a roster reports nothing, and treating silence as blindness would route good models through a detour. The capability lookup moved to its own module, is cached for five minutes because it runs on exactly the requests that are already slowest, and is never inferred from the model id. liteLLMBaseUrl moved from the admin route to litellm.js, where the other gateway helpers live. The new setting is guarded like the slide reviewer: a model the gateway calls text-only cannot be saved as the one that looks at images. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 15:43:36 +02:00
Daniel	03621752e8	feat: image fallback chains for every workflow, and a library worth looking at ... **Fallbacks.** One image model meant a refusal, a rate limit or a model the gateway had since dropped ended as a missing picture. Every workflow now tries its model, then each fallback in order, stopping at the first that produces an image. Primary plus two, capped: each hop is a paid request, and a chain long enough to need a cap is long enough to surprise someone. My Resources previously had no fallback at all — only the Clinical Assistant did, and only one. That is backwards: a missing figure is most visible in a deck, where it leaves a hole in a slide. The retry rule is now a classifier that says *why*, rather than a boolean. Transient faults, a 404 for a model the gateway does not have, and a content refusal all move to the next model — a refusal because policy is a vendor decision, not a fact about the request. 401/403 stop immediately (one gateway, one set of credentials, the next model fails identically), as do 413 and any other 4xx, which are malformed everywhere. Refusals are recognised from the message: no provider sends a machine-readable reason and the status varies. Each hop re-leases the job, so a chain cannot outlive its claim and let a second worker repeat the same paid work, and the row records the model actually being paid for so a picture made by the third model is not attributed to the first. The old singular `fallback_image_model` is still read, so an existing configuration keeps working without anyone re-entering it. **Library.** Documents/Images tabs in My Resources, with a real grid: fixed aspect tiles so the rows line up whatever shape the pictures are, a source badge on the picture, two-line prompt, hover lift, shimmer skeletons while thumbnails land, and a lightbox that closes on Escape or the backdrop and restores focus. Actions are hidden on hover only behind `@media (hover:hover)` — hiding delete behind :hover would put it out of reach on touch and keyboard. Downloads go through privateImageBlob rather than a bare `<a download href>`: a mobile client's session is a bearer token an anchor cannot send, and these assets are served no-store on purpose. The gallery lives in My Resources only. Assistant images appear in it, which was the point; the assistant page does not grow a gallery of its own, and a test asserts no assistant module lists the endpoint. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 14:53:04 +02:00
Daniel	259b4858be	feat: an image library — every picture this account has made ... A figure outlives the deck it was drawn for: the deck gets replaced, the diagram is still good. Until now a generated image could only be seen in the resource it was made for, and there was no way to find one again or to delete it. Library → Images is a grid of every finished image the account owns, across all three workflows, newest first. GET /api/generated-images is scoped by owner_id in the statement rather than filtered after, returns only finished jobs — an unfinished one is a broken frame in a gallery — and pages by keyset, because a gallery that grows while you scroll repeats or skips rows under OFFSET. Most of this already existed. Thumbnails were already rendered at 256 and 640 by sharp and already served by ?w=, with their own checksum so the client's tamper check passes on a derived copy; hydrateImage already handles auth, the account boundary and caching. The tiles ask for the 256px preview, so thirty of them cost a few kB each rather than thirty full-size downloads, and the prompt is decrypted for the caption because it is the only human-readable label an image has. Deleting needed new work. The storage interface had no remove at all, so a delete that dropped the row would have left the object and both previews in the bucket — paid for, and still readable by anything with credentials. Storage now removes all three keys, and the bytes go before the row: a row pointing at a missing object is a broken image in a gallery, while an object without its row is only wasted space, and unreachable storage refuses the delete outright rather than reporting a success that left the picture behind. THUMB_WIDTHS now has one definition, in generatedImageStorage. Two copies drift, and the drift that matters is a width that gets written and never deleted. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 14:36:30 +02:00
Daniel	83206e907c	fix: a second deck reused the first deck's pictures ... The image job key was the request-body hash plus the figure's position — slide index for a deck, reply index for a document. Two generations from the same form produce the same body hash, so figure 4 of the second generation collided with figure 4 of the first on the unique (owner, workflow, idempotency_key). The constraint handed back the existing job, and the new deck displayed the old deck's artwork. The decks are not even the same length, so the reused picture could land on a slide about something else entirely. Keyed on what is being drawn now: the body hash stays, so submitting the identical request twice still dedupes rather than billing twice, and a hash of the prompt (plus layout and shape) is what makes two different pictures two different jobs. Same fix in deckBuild and resourceImages. Also split fileLog out of logger. logger requires the database at module load, so importing it to record a diagnostic pulls in a connection pool — wrong on its own terms, and it hung the whole test suite when imageTool started logging its refusals: a unit test that never touches a database inherited an open pool handle and never exited. logger.file now delegates to fileLog, so there is still one implementation of where a line goes and how it is redacted. With that in place, every image-tool refusal is recorded durably. There are five of them, they want five different fixes, and until now none of them left any trace once the container was replaced. Verified against a mutation: restoring the index-based key fails two of the four collision tests. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 08:26:09 +02:00
Daniel	94f320f140	fix: an empty answer from the model was the one failure never caught ... The Clinical Assistant answered "image summary" with a zero-length string, saved that as the turn, and drew it as an empty bubble. No error was raised, nothing was logged, and the empty turn stayed in the conversation history where it degrades every answer after it. Confirmed by decrypting the saved chat: the final assistant turn is content length 0. The cause is one line. finalizeAssistantAnswer only regenerates an answer that shouldRegenerateTruncatedAnswer flags, and that function opens with `if (!answer) return false` — there is no dangling conjunction to detect in a zero-length string, so empty was classified as "not truncated" and returned as a result. Every other failure mode had a path; this one had none. An empty answer is now asked for once more — a model returning nothing is usually transient — and if it comes back empty again it raises 502 `empty_answer`, which both callers already turn into a visible error. Whitespace counts as empty, and so does an answer that strips to nothing. Without a callAI to retry with it still raises rather than returning empty. Verified against a mutation: removing the new branch fails five of the six tests. This is separate from the image question in the same request. No image job was created, because "image summary" does not match the text fallback pattern — which requires a verb (create/generate/draw/…) before the noun — and the model did not call the tool. That is left alone for now: the request is genuinely ambiguous, and guessing at it is how an assistant starts making pictures nobody asked for. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 07:41:04 +02:00
Daniel	e244ee5240	feat: modifying a deck can see it ... The model editing a deck could not see it, which made most of what people actually ask for unanswerable: "that slide is too crowded", "the diagram is in the wrong place", "this one looks empty" are facts about the rendered page, not about the JSON. When a vision model is configured, modifying now renders the current deck — with its figures, unlike the review pass, which runs while they are still being drawn — and hands the model one image per slide alongside the JSON. Same pipeline as review, reused rather than reimplemented: pptx, Gotenberg, PDF, pdftoppm, capped at MAX_SLIDES. The vision model then does the editing, which is a second and separately measured benefit. On a real 20-slide deck, ds-deepseek-v4-flash returned the deck unchanged for "make it better" — the echo reported yesterday — while openrouter-gemini-3.8-flash applied it. So the stronger model fixes the echo even without sight. A model the author picks explicitly still wins over both. The result is rendered and reviewed again. Generation-only was the old rule, on the reasoning that refining is a text edit; it is not. The edit is made against how the deck looked before it, so a slide that gains two bullets only overflows once it is rendered again. The reviewer may reposition but is held to the same words, so a verification pass cannot quietly undo what was just asked for. Whether an instruction achieved anything is judged on the model's edit, before the reviewer runs, or a reviewer nudging a slide into two columns would mask an instruction that did nothing. Sight is an upgrade, never a dependency: no vision model, Gotenberg down, a render that fails — each falls through to editing blind, and a test covers each of those paths. Verified against two mutations: keeping the text model when images are attached, and dropping the verification pass, each fail exactly one test. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 06:55:16 +02:00
Daniel	973f9d554f	feat: a text-only model cannot be set as the slide reviewer ... The reviewer is shown rendered images of the deck, so a text-only model there fails on every generation — at request time, long after the one moment an administrator could have picked differently. Nothing checked it. Saving my_resources.review_model now asks the gateway what it reports for that model and refuses only an explicit supports_vision === false. Three answers, not two. Most of this roster carries no supports_vision at all (every openrouter-* entry here), and refusing unknowns would block the reviewer this deployment already runs on. An unreachable gateway is not evidence about a model either, so it never blocks the save. Empty means review is off and skips the lookup entirely. The capability is read from the gateway, never inferred from the model id. Verified against a mutation: relaxing `canSee === false` to `canSee !== true` fails the two tests that say unknown must stay allowed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 06:42:44 +02:00
Daniel	491a2b0811	fix: the My Resources diagnostics survive a deploy ... logRefine writes the one line that answers "did that modification change anything" — path, before and after size, CHANGED=yes/no, figures, model, instruction. It went to console, so it lived in the container's stdout and was destroyed the next time the container was recreated. That cost a diagnosis today: a modification came back unchanged, the user asked why, and the evidence had already been deleted by a deploy. The deck-fallback warnings and the deck-vocabulary gaps had the same problem, and those exist specifically to be read later — the vocabulary gaps are meant to show which shapes to build next, which is a question about weeks, not about one container. All of them now go through logger, which writes the dated file in the scribe-logs volume and ships to Loki when it is configured, and carries the event as structured data rather than only as a formatted string. console.error is left alone: those are failures, and logger.error already echoes to the console. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 06:09:34 +02:00
Daniel	07d1c541a0	fix: a deck the model fumbles once is asked for again, not abandoned ... A presentation is generated as a typed deck — the model chooses each slide's layout — and that deck is what scripts/render_pptx.py renders. When the reply did not parse as a deck, the route fell straight back to asking for markdown, and slideSpec.build() then inferred slides from it. Both paths go through python-pptx, but the fallback's layout is guessed from heading and list structure rather than chosen, so everything lands as title-and-bullets. Measured on the stored library: since decks landed, 7 of 8 generations produced one and 1 did not. Models are stochastic, so one unlucky reply was costing the whole layout. It now asks a second time with the same prompt before giving up. The fallback was also invisible. It warned to the console, where the person who would simply have generated again could not see it, so they kept the plainer deck without knowing a better one was one click away. The response now carries deckFallback and the UI says it came out as plain slides, and why. Fixed the reason heuristic while adding tests for it: truncation was claimed for any reply not ending in "}", which is every prose refusal. It is now only claimed for a reply that began as JSON and stopped. The four generate tests run the handler. Verified against a mutation: removing the retry fails tests 6 and 7 and nothing else. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 05:34:14 +02:00
Daniel	e69eb9a9f7	fix: modifying a presentation failed whenever illustration was ticked ... existingDeck was declared below the branch that reads it, so `var` hoisting made it undefined there. With illustration on, a deck modification therefore appended the *markdown* instruction — "Returning the markdown is still required; a tool call is not a substitute for it" — to a prompt whose body asked for deck JSON. The model was told to produce two different artifacts in one reply, the reply parsed as neither, and deckBuild.parse returned null, so the handler answered 502 "That change could not be applied." Moved the declaration above its first reader. Same class of fault as the savedFigureIds one, in the same file. Two things made it hard to see, both fixed: - The library row read created_at, so a modification that did apply left the visible timestamp on the generation time. That timestamp is what led to "modification doesn't work" — it was the only signal available, and it was reading the wrong column. Rows now show the modified time when there is one. - A model can also return the document back unchanged. That was logged server-side and answered "Applied. Download it to see the result", which sent people to download an identical file. The response now carries `unchanged` and the UI says so, keeping the instruction in the box so it can be reworded. Also surfaced has_deck on the library list: 28 of 38 stored presentations have no deck and go through the weaker flat-markdown path, and nothing in the UI distinguished them. They now read "plain text, no slide layout". test/my-resources-refine.test.js runs the handler rather than reading it, since all three faults were invisible to source reading. Verified against a mutation: putting the declaration back where it was fails test 1 and nothing else. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 05:05:39 +02:00
Daniel	cfb8aab77d	fix: /api/health/detailed reported a text-to-speech provider that does not exist ... The endpoint answered from environment variables of its own rather than from the speech code, so ELEVENLABS_API_KEY being set made it report tts: 'elevenlabs'. There is no ElevenLabs path in ttsProvider.js — getTTSProvider() only ever returns 'litellm' or 'none' — so the one endpoint an operator checks to find out what speech is doing was reporting a provider this app cannot use. Likewise whisper: OPENAI_API_KEY, which stopped describing STT when transcription moved behind the gateway. Both now ask getSTTProvider() and getTTSProvider(), the same functions the routes ask, so the answer cannot drift from behaviour again. Removed the two other ElevenLabs leftovers: the FAQ told users their notes were read aloud by "Google, OpenAI, or ElevenLabs", and a TTS test used 'elevenlabs' as its sample value for the passthrough of TTS_PROVIDER, which implied the provider was supported. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 05:05:39 +02:00
Daniel	5614a436be	fix: a deck asked for a figure and never got one — three causes, one symptom ... "Include a diagram" produced decks with no picture. Three separate faults, each hiding the next, found by generating the same deck after fixing each one. First, deck generation ran on the default 4000-token budget. A deck's JSON is several times the size of the prose it holds, so a long deck came back truncated, failed to parse, and fell back to markdown — which has no way to request a figure, so the model described one instead and the slide rendered a literal "![Placeholder: Flow diagram ...]" as its first bullet. Deck generation now gets room, and the fallback says how the reply failed: empty, cut short at N characters, or not a deck. Second, the figure request sat inside the layout vocabulary, one line among forty, and the model passed over it. It goes last now, after the author's own instructions — the same placement lesson the image tool taught earlier. Third, and the one that actually mattered: image_prompt is only read on the figure and image types, so an image_prompt on a bullets slide was dropped in silence. The instruction said "add image_prompt to N slides" without saying which types carry one. It now names them, and a misplaced request is honoured rather than discarded — a slide with words becomes a figure, one without becomes a full-slide image. Image markup is also stripped wherever text enters a slide, on both paths: a described figure is not a figure, and a bullet of raw markdown is worse than no bullet. Verified end to end after: the same request produced a deck with one figure, the job completed, and the exported pptx carries one embedded image across 21 slides. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 04:28:30 +02:00
Daniel	2c3fbbcf37	fix: decks were falling back to markdown, so no figure could ever be requested ... A deck's JSON is several times the size of the prose it holds, and generation used the default 4000-token budget — raised for refine and for slide review, but never here. A sixteen-slide deck ran past it, came back truncated, failed to parse, and fell back to markdown. Markdown has no way to ask for a figure, so the model described one instead and the slide rendered a literal "![Placeholder: Flow diagram — "Neonate with rash" → ...]" as its first bullet, above the steps it was meant to illustrate. That is why no generated deck was arriving with an image. Deck generation now gets room for a deck. The fallback also says how the reply failed — empty, cut short at N characters, or simply not a deck — because those want different fixes and "not usable" covered all three. Image markup is stripped wherever text enters a slide, on both the deck and markdown paths, since a described figure is not a figure and a bullet of raw markdown is worse than no bullet. The model is also told plainly: if a figure is wanted say so with image_prompt, and if that is not on offer, write the slide without one rather than describing the picture you would have drawn. Separately, the Documentation list showed ARCHITECTURE, CLINICAL_ASSISTANT, DEVELOPMENT, MODULE_CONVENTIONS and SCALING shouting in caps with underscores intact: the label builder replaced hyphens but not underscores, and uppercased the first letter of each word rather than normalising the case, so a SHOUTING_FILENAME stayed shouting. It now reads "Clinical Assistant", keeps acronyms as acronyms (AI, API, OpenID, LiteLLM) and leaves joining words lower. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 04:21:20 +02:00
Daniel	3ec65a91f6	fix: a figure asked for while modifying a deck now belongs to a slide ... Ticking "Add illustrations" on Modify offered the image tool regardless of what was being edited. The tool returns job ids and has no way to place them, which is fine for markdown — there is nowhere to put a figure in markdown anyway — and wrong for a deck, where figures are placed by a slide declaring them. So modifying a deck with illustrations on generated a figure, paid for it, recorded it against the resource, and referenced it from nothing. Measured: one figure recorded, zero referenced by a slide, and absent from the export. Deck mode now asks the revised deck to declare its figures and draws them with the same drawFigures() generation uses, so each one belongs to the slide that wanted it. Slides that already have a figure keep it. The tool path stays for markdown resources, where it is the only option. Verified: the same modification now records one figure, one slide references it, and the exported deck embeds one image. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 01:24:40 +02:00
Daniel	012346528c	fix: generation stopped working whenever the slide reviewer was switched off ... savedFigureIds was declared inside the review branch, so with no reviewer configured — the default, and what everyone is running — it was undefined by the time the INSERT stringified it. JSON.stringify(undefined) is not a string, the column is NOT NULL, and every generation failed with "Generation failed". `var` is function-scoped, so nothing complained until the database did. This is the second bug of exactly this shape in this file, so the test asserts position rather than presence: the value must be declared before both the review and the insert read it. Found by the logging added in the same change, which is the other half of this commit. Every modification now says what it did: [my-resources] refine id=29 path=deck outcome=applied 13→14 slides changed=yes [my-resources] refine id=37 path=markdown outcome=applied 2635→3018 chars changed=yes CHANGED=no is warn-level and deliberately shouty, because that is the failure worth catching: the response says success either way, the row updates, and the download is identical — which is exactly how the deck bug went unnoticed. A refusal logs its reason. ped_ai_resource_refine_total{path,outcome} counts the same thing over time, so "did that modification do anything" is answerable without watching logs live. Verified across every path rather than the one that was broken: a deck presentation modified and exported to both pptx and docx carries the change; a legacy presentation with no stored deck still takes the markdown path and carries it; an article generates, modifies and exports; and a presentation generates with the reviewer off. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-12 00:57:30 +02:00
Daniel	f66daf0c02	fix: modifying a presentation changes the presentation, not just its markdown ... Export renders a presentation from its stored deck. Refine edited the markdown beside it and never touched the deck — so a modification reported success, updated the title and the library row, and produced a byte-identical download. Nothing said otherwise. It looked like the model had ignored the instruction. Measured before the fix, with a marker that was definitely not in the deck: refine succeeded, the stored markdown gained the new slide, the stored deck did not, and the exported pptx did not. After: the export gains the slide and the marker, twelve slides where there were eleven. A presentation with a stored deck is now edited as a deck — the deck goes to the model, a revised deck comes back, and the markdown is serialised from it, which is the same direction generation runs in. Layouts, custom slides and image_job values survive a modification instead of being flattened away. A reply that is not a usable deck is refused rather than saved as markdown: saving it would drop every layout the deck held while looking like it worked, which is the failure this commit exists to remove. Articles have no deck and keep the markdown path unchanged. The reply restates the whole resource, so the token budget is raised to match — the old default was already close to truncating a long deck's markdown. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-11 23:55:27 +02:00
Daniel	4f8e686907	feat: record what a deck wanted and could not have ... The shape vocabulary is deliberately small, which leaves the question of what to add next. Rather than guess, it now records demand. Two signals, because a model asks both ways. It can say so outright — {"kind":"unsupported","need":"a SmartArt cycle of four stages"}, which draws nothing and is told about in the same file that validates it — or it can reach for a kind, chart type or slide type that does not exist, which is the more common way of asking and just as much of a signal. Both produce a log line naming what was wanted and the topic it came up on, and increment ped_ai_deck_vocabulary_gap_total{wanted}, so it can be counted over time in Grafana rather than noticed once and forgotten. Deduplicated per generation and capped at twelve: a model that asks for a hundred things it cannot have should not write a hundred log lines. It can never fail a generation — it is a note to whoever decides what to build next. This is also the answer to whether to run model-authored code in a sandbox instead. The log will say whether the gap is real. Some of it is not closeable by any sandbox, being python-pptx's own ceiling — no SmartArt, no animations or transitions, limited chart types — and a sandbox would only let a model write code against the same library and hit the same wall. Documented in docs/my-resources.md, which the in-app Docs tab serves directly. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-11 22:51:15 +02:00
Daniel	af2e09c1de	feat: a slide can be drawn from primitives when the named layouts have no word for it ... The nine layouts are a fixed vocabulary and a good default, but "lay the three severity levels out left to right with arrows between them" had no expression in them at all. A "custom" slide now carries a list of shapes: positioned text, eight autoshape families, lines, images, tables, and native PowerPoint charts — column, bar, line, pie, doughnut. Coordinates are percentages of the slide rather than EMU, because a model reasons about "the left half" and not about 12192000. Shapes draw in array order, so a later one sits on top. The model never emits Python. It names shapes and the renderer draws them: running model-authored code to lay out a slide would be an enormous amount of trust to buy a feature, on a server holding clinical data and secrets. Validation lives beside the text that teaches the vocabulary, in one file, so what the model is told about is exactly what is accepted. Kinds are an allowlist, colours must be six hex digits, coordinates are clamped inside the slide — a shape at x=95 w=30 is cut to the edge rather than drawn half off it — counts are capped, a pie is held to one series, and anything that cannot be understood is dropped. A custom slide that loses every shape becomes a plain one rather than a heading over an empty frame, and one bad shape is caught in the renderer so it cannot cost the slide it sits on. A figure on a custom slide is requested through an image shape, drawn by the same path as any other, and attached by job id. Word renders a custom slide as its words in reading order with its tables and figures — lossy, and better than dropping the slide. Verified live end to end: asked to "lay the three severity levels out left to right as coloured boxes with arrows between them", the model produced [rect arrow rect arrow rect], chose green/amber/red itself, and the rendered slide was looked at. A column chart beside its commentary renders with real axes and gridlines. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-11 22:12:26 +02:00
Daniel	154b896d5b	feat: Word is built by python-docx from the same typed source as the deck ... Pandoc reads markdown, so every Word export had to flatten the resource to markdown first — and a deck flattened to markdown stops being one. A comparison became two headings and two lists, a callout became bold text, and a figure became nothing at all, because markdown has nowhere to put it. src/utils/docSpec.js reduces either source to the same blocks: a stored deck where there is one, the markdown where there is not. scripts/render_docx.py draws them. A comparison comes out as a labelled two-column table, a callout as a shaded box, a table as a real table, a figure embedded at its own aspect ratio with its caption, and speaker notes as muted indented text. The deck wins over the markdown beside it, because that markdown is a serialisation of the deck and reading it instead would be reading a lossy copy of what is right there. Word now carries the figures too. The export route skipped fetching them for docx, which was correct when pandoc could not place them and wrong the moment this could. Pandoc stays installed and stays the fallback: a plainer document beats a failed download. Both renderers now share one spawn helper. Verified end to end: a deck with two figures exported as a six-page Word document with both images embedded (537KB, two files in word/media), rendered to PDF and looked at — the comparison is a labelled table, the figure sits at its true aspect ratio, and the notes read as notes. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-11 21:58:53 +02:00
Daniel	9d307fd442	feat: a vision model looks at the rendered deck and fixes the layout ... The model that writes a deck never sees it. It cannot tell that slide four overflowed, that a nine-item list would read better in two columns, or that two labelled groups want to be a comparison — those are facts about the rendered page, not about the text. So each generated deck is now rendered to PDF through Gotenberg, rasterised to one image per slide with pdftoppm, and shown to a vision model. Off unless an administrator names a reviewer, in its own admin card because it is the one setting that spends money on every generation without a user having asked for anything. One pass, on generation only: a second pass costs as much as the first and fixes far less, and refining is a text edit. It returns a patch, not a deck. Asking for the corrected deck back put the reply in proportion to the deck rather than to the number of problems, and a fourteen-slide deck came back cut off mid-object at every output budget the provider would honour — measured twice before changing shape. The patch is better for a second reason. The reviewer names a slide and an action — two columns, one column, split after bullet N, compare with these two labels — and the server moves the text it already has. The words never pass through the model, so a review cannot reword, drop or invent a single bullet. That is a stronger guarantee than instructing it not to and checking afterwards. The check runs anyway, because a bug in applyChanges would be as bad as a model rewriting the words and worse for being trusted: body text must come out the same multiset, figures the same set, and a heading may only be reused or extended. A continuation heading is the reviewer's one piece of text and is replaced when it does not continue anything. Nothing here can fail a generation — no reviewer, an unreachable one, an unparseable reply, a deck too long to look at, or a patch that applies to nothing each return the deck that was written. Verified end to end against a deck with a deliberately overloaded slide: three slides rendered and sent, one change returned, ten bullets split into five and five under "Stepwise Management … (continued)", text intact. Left switched off; enable it under Admin. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-11 21:38:18 +02:00
Daniel	f3c3f47d99	fix: voice mode reads the answer that just arrived, and reads what the page shows ... Two bugs, one cause each. It read the previous answer. setBusy(false) is what announces assistant-answer-done, and it ran before lastAnswer was assigned — so every listener was handed the answer before last. It now fires after the answer exists both in that variable and on the page. A test asserts the order, because the order is the whole bug. And it read the markdown. The better answer than unpicking the markup is not to have any: the rendered bubble is already the answer with its headings, emphasis and tables resolved, so voice mode reads that. It cannot drift from what the reader is looking at, and it needs no rules about what "##" sounds like. Read from a clone, with the parts that are not the answer removed — the action buttons, the sources list, the follow-up suggestions, code blocks and tables — so the page itself is untouched. A bubble still thinking is never read. speakableText() stays as the fallback for when the bubble cannot be found, since raw markdown read aloud is worse than silence. Separately: e2e/seed.js hashed with bcrypt directly, so seeded accounts did not exercise the argon2id path production writes. It uses the app's own hasher now. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-11 21:10:50 +02:00
Daniel	0e17f553fc	fix: hanging up the voice call stops the voice, and the answer is read not its markup ... Ending the call stopped listening and aborted the request but never stopped playback, and the <audio> element was a local variable with no handle kept — so nothing could stop it and the answer talked on until the page was reloaded. conversationMode now holds whatever is speaking, whichever of the two players it is, and hanging up silences it before anything else. Starting a new turn does the same, because speaking over the previous answer is how an assistant talks past you, and a reply that arrives after the overlay has closed no longer starts talking into a closed call. The other half: the raw answer went straight to the speaker. It is markdown, so a browser voice reads "#" and "**" aloud or stumbles over them. speakableText() now reduces it to what a person would read out — headings and bullets become sentences, links keep their words, emphasis and code fences are dropped, tables are dropped entirely because a table read aloud is noise, and a removed citation marker leaves no gap before the punctuation it preceded. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-11 20:52:35 +02:00
Daniel	b98ffc61c7	fix: expired invitations can be cleared too, revoked ones still cannot ... An expired code is as dead as a used one and just as accounted for, so it is now deletable. The rule the code enforces is the one that matters: a code that could still be redeemed is never deleted, because that takes it off the list without taking it out of anybody's inbox — the holder keeps something that looks valid, it quietly stops working, and nothing is left to say who had it. One condition, shared by the single delete and the bulk clear: (used_at IS NOT NULL OR (revoked_at IS NULL AND expires_at <= NOW())) Written that way rather than as "used OR past its date" because the second form also catches a revoked code whose date has since passed — a row the list still labels revoked and offers no delete on, so the button and the query would have disagreed about the same row. Revoked codes keep their rows. Revoking records a decision somebody took, and a handful of them is not the clutter a pile of expired codes is. Verified against the live database across every state: active refused, used deleted, expired deleted, revoked refused, and revoked-with-a-past-date refused rather than slipping through as expired. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Dv6sqaY6Vq3ChZHMem3cnU	2026-09-11 20:41:18 +02:00