From 076ba87118335173f7c9d5b5160020e878728820 Mon Sep 17 00:00:00 2001 From: NoLooseEnds Date: Thu, 19 Oct 2017 10:16:27 +0200 Subject: [PATCH] Updated Readme --- R710-IPMI-TEMP/readme.md | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/R710-IPMI-TEMP/readme.md b/R710-IPMI-TEMP/readme.md index 1769967..340ddc5 100644 --- a/R710-IPMI-TEMP/readme.md +++ b/R710-IPMI-TEMP/readme.md @@ -4,7 +4,9 @@ Inspired by [this Reddit post](https://www.reddit.com/r/homelab/comments/72qust/ 1. Enable IPMI in iDrac 2. Install ipmitool on linux, win or mac os -3. Run the following command to issue IPMI commands `ipmitool -I lanplus -H -U root -P ` +3. Run the following command to issue IPMI commands: +`ipmitool -I lanplus -H -U root -P ` + **Enable manual/static fan speed:** @@ -24,17 +26,20 @@ Inspired by [this Reddit post](https://www.reddit.com/r/homelab/comments/72qust/ `raw 0x30 0x30 0x01 0x01` + **Other: List all output from IPMI** `sdr elist all` + **Example of a command:** `ipmitool -I lanplus -H 192.168.0.120 -U root -P calvin raw 0x30 0x30 0x02 0xff 0x10` + # Safety BASH script I made a BASH script to check the temperature, and if it's higher than XX (27 degrees C in my case) it sends a raw command to restore automatic fan control. -Script [Reddit thread](https://www.reddit.com/r/homelab/comments/779cha/manual_fan_control_on_r610r710_including_script/) +The Scripts [Reddit thread](https://www.reddit.com/r/homelab/comments/779cha/manual_fan_control_on_r610r710_including_script/) *****